Cutting the EPS Cement Sandwich Panel to fit custom dimensions around windows, doors, and irregular building features is a simple process as long as you use the right tools and follow a few easy step by step techniques. First, mark your exact desired cut line clearly on both the front and back cement facing of the panel using a long straight edge and a permanent marker, to ensure your cut stays perfectly straight all the way through the full panel thickness. For straight long cuts, a standard circular saw fitted with a diamond tipped masonry cutting blade will make fast, clean, and consistent cuts through the cement facing and EPS core without creating excessive amounts of dust. For smaller notches, curved cuts, or adjustments around utility penetrations, you can use a heavy duty jigsaw with a masonry cutting blade to carefully trim the panel to your exact required shape. Always wear proper personal safety equipment including a dust mask and safety goggles when cutting the EPS Cement Sandwich Panel, to avoid inhaling any fine cement dust particles created during the cutting process. After making your cut, simply use a coarse sanding block to smooth down any rough or jagged edges on the cut face, and the panel will be ready for installation with no further finishing work required.
