For construction teams that are new to working with EPS Cement Sandwich Panel on hotel projects, the installation process is far simpler and faster than most people expect, as long as you follow the standard step by step workflow. First, you need to measure and mark the exact position of every partition wall on the hotel floor, then install the bottom and top U shaped tracks that will hold the panels in place. After the tracks are secured with expansion bolts, you can lift each pre cut panel into the track, adjust it to make sure it is perfectly vertical, and then secure it to the adjacent panels with special connecting screws. Once all panels are in place, you fill the small gaps between panels with special joint mortar, and then stick a reinforcing fiber mesh tape over the joints to prevent any cracks from forming as the building settles. The whole process does not require specialized heavy equipment, and workers only need a few hours of basic training to master the full installation workflow. Two experienced workers can easily hit the 50 to 80 square meter per day installation speed, which is more than 4 times faster than traditional block wall construction. For hotel renovation projects, you can even cut the panels on site with standard power tools to adjust for any irregular wall shapes around existing pipes, electrical outlets, or door frames. Many construction teams that first used these panels on a hotel project reported that they finished the entire wall installation phase 3 weeks ahead of their original schedule, with zero on site safety incidents and far less physical fatigue for their workers compared to heavy masonry work.
