If you are a home renovation DIY enthusiast who wants to try installing lightweight partitions by yourself EPS Cement Sandwich Panel is a very beginner friendly material that you can work on with basic tools. First you need to measure the exact height and width of the partition area carefully and mark the cutting line on the surface of the EPS Cement Sandwich Panel with a pencil. You can use an ordinary electric circular saw with a cement cutting blade to cut the panel smoothly and remember to wear a dust mask and safety goggles during the process to protect yourself from small cement dust. After cutting the panel to the correct size you can place it vertically on the pre installed bottom track and adjust it to make sure it is completely straight and level. Then you can connect adjacent EPS Cement Sandwich Panels with special matching joint accessories and fill the small gaps between panels with dedicated joint mortar. Unlike heavy concrete blocks that require two strong people to carry a single piece one average adult can easily move and place a standard size EPS Cement Sandwich Panel without extra help. After the joint material is fully cured you can sand the joint area slightly and it will be ready for painting or wallpaper decoration. Even if you have no professional masonry experience you can finish a small partition project with EPS Cement Sandwich Panel by following the standard installation tutorial step by step.
