Hotel bathrooms are one of the harshest usage environments in the entire hospitality building, with long term high humidity, frequent water splashes and large temperature differences. Many traditional wall materials such as ordinary gypsum board, aerated concrete blocks and even clay bricks are prone to water seepage, mold growth, wall peeling and structural deformation after several years of usage in this humid environment. The EPS Cement Sandwich Wall Panel is specially designed with excellent moisture resistance, making it the perfect wall material for hotel bathroom zones.
The production process of EPS Cement Sandwich Wall Panel uses fully inorganic cement based raw materials, so the panel itself will not absorb a large amount of water like porous gypsum or aerated concrete. The standard water absorption rate of the panel is lower than 8%, which means even if the wall is exposed to frequent water splashes in the bathroom, it will not become heavy, soft or deformed due to absorbing too much moisture. The surface calcium silicate board also has excellent water repellent performance, so water droplets will not penetrate into the interior of the panel easily. After simple waterproof coating treatment on the bathroom wall surface, you can directly paste tiles, install shower partitions or fix bathroom fixtures on the EPS Cement Sandwich Wall Panel.
Many hotels that used traditional walls in their bathrooms reported that after 3 to 5 years of operation, the wall around the shower area would start to grow dark mold spots, the tiles would peel off, and the wall structure would become soft and hollow. Renovating these damaged bathroom walls usually requires breaking the old wall completely, which takes several days and makes the entire guest room unavailable for rent. After replacing these old walls with EPS Cement Sandwich Wall Panel, hotels found that even after more than 10 years of continuous usage in the humid bathroom environment, the wall still remains intact, no mold, no deformation and no tile peeling problems occur.
The strong hanging performance of the panel also brings extra benefits for hotel bathrooms. You can directly fix bathroom cabinets, shower heads, towel racks, bathroom mirrors and heavy bathtub fixtures on the EPS Cement Sandwich Wall Panel, no special pre embedded keel or concrete structure is needed. This greatly simplifies the bathroom construction process and reduces the total project cost. For hotel maintenance teams, this material greatly reduces the annual wall repair work in guest room bathrooms, allowing them to focus on more important guest service related tasks instead of dealing with frequent wall damage issues.
