Fixing heavy mounted objects such as large TV sets wall hung air conditioners and heavy decorative paintings on EPS Cement Sandwich Panel partition wall can be done safely with correct operation methods. For objects that weigh less than 50 kilograms you can directly use special long expansion bolts that penetrate through the whole EPS Cement Sandwich Panel to the other side and add a large pressure bearing gasket to disperse the weight. For objects that weigh more than 50 kilograms you should pre embed a reinforced metal back plate inside the EPS Cement Sandwich Panel before installation to enhance the local load bearing capacity of the wall. Do not use ordinary short self tapping screws to fix heavy objects on EPS Cement Sandwich Panel which may easily cause the screws to pull out from the panel after long term use. After the fixing work is finished you can do a simple manual pulling test to check whether the installed heavy object is firm and reliable. Following this correct fixing method can ensure that all kinds of heavy objects hung on the EPS Cement Sandwich Panel partition wall will not fall off safely for decades.
